The JENDER automatic drain solenoid valve combines an analog circuit electronic timer with a solenoid valve to automatically discharge condensed water from the compressed air system at fixed intervals.
The automatic drain solenoid valve is widely applied in compressed air system components such as separator filters, JENDER refrigeration dryers, and tanks. The discharge time and interval time can be adjusted according to different requirements.
Technical Specifications of the JENDER TIMED drain
Interval Time (OFF): 0.5 – 40 minutes
Discharge Time (ON): 0.5 – 10 seconds
Manual Test Switch: Micro switch
Orifice Diameter: 3.5 mm
Working Pressure: 0 – 16 bar
Supply Voltage: 220 V / 50 Hz
Outlet Connection: 1/4″ BSP MIN./MAX.
Power: 22 VA
Current Consumption: 4 mA max.
Voltage Options: 230 V AC
Working Temperature: -40ºC – +60ºC
Material: Brass and ABS
Inlet Connection: 1/2″ (BSP or NPT)
