Technical Specifications of the JENDER INV JSC 110V Rotary Screw Compressor
– Pressure Range: 6-15 bar
– Working Pressure: 10 bar
– Flow Rate: 17.1 m³/min
– Suction or Ambient Temperature: 0-40 ºC
– Outlet Temperature: +5 ºC above suction temperature
– Motor Power: 110 kW – 150 HP / 3 phases / 50 Hz / 380 V
– Motor Speed (RPM): 2900 rpm
– Motor Protection Class: IP 55
– Motor Efficiency: IE 3
– Transmission: Direct
– Frequency Inverter: Danfoss
– Electrical Equipment: WEG or similar
– Control Panel: PLC Control Panel
– Outlet Connection: 2″
– dB (A): 76 dB
– Dimensions (mm): 1700 x 2700 x 1855
– Weight: 2650-2740 kg
The JSC range of rotary screw compressors has been designed to meet the compressed air needs of small and medium-sized businesses, such as automotive service stations, repair and paint shops, and various types of industries. The JSC series can be configured according to requirements, mounted on a tank, with or without an integrated dryer. JSC series products are easy to install and maintain, providing reliable and high-quality compressed air. The JSC series stands out for its energy efficiency, superior to piston compressors of similar capacity. Built standard with a frequency inverter.
If you need to view other compressors, please visit our COMPRESSORS category.
If you have any doubts about the specific compressor you need, please do not hesitate to contact our technical team, who will assist you with your selection.
We have other models with different power and working pressures. If your needs differ from those listed in the catalog, please consult us.
