Technical specifications of the JENDER INV JSC 200VD screw compressor
– Pressure range: 6-15 bar
– Working pressure: 7.5 bar
– Flow rate: 42.68 m3/min
– Intake or ambient temperature: 0-40 ºC
– Outlet temperature: +5 ºC above intake temperature
– Motor power: 200 kW – 270 HP / 3 phases / 50 Hz / 380 V
– Motor speed (RPM): 2900 rpm/min
– Motor protection class: IP 55
– Motor efficiency: IE 3
– Transmission: direct
– Variable frequency drive: Danfoss
– Electrical equipment: WEG or similar
– Control panel: PLC control panel
– Outlet connection: 3”
– dB (A): 79 dB
– Dimensions (mm): 2150x3700x2350
– Weight: 5450 kg
The JSC range of screw compressors has been designed to meet the compressed air needs of small and medium-sized businesses, such as car service stations, repair and paint shops, etc., as well as different types of industry. The JSC series can be configured to suit your needs, mounted on a tank, with or without an integrated dryer. JSC series products are easy to install and maintain, providing reliable, high-quality compressed air. The JSC series stands out for its energy efficiency, superior to piston compressors of similar capacity. Standard-built with a variable frequency drive.
If you need to see other compressors, visit our COMPRESSORS category.
If you have any questions about the specific compressor you need, please do not hesitate to contact our technical team, who will help you with your selection.
We have other models with different power and working pressure. If your needs differ from those shown in the catalogue, please contact us.
