Technical specifications of the JENDER INV JSC 315VD screw compressor
– Pressure range: 6-15 bar
– Working pressure: 10 bar
– Flow rate: 53.65 m3/min
– Intake or ambient temperature: 0-40 ºC
– Outlet temperature: +5 ºC above intake temperature
– Motor power: 315 kW – 430 HP / 3 phases / 50 Hz / 380 V
– Motor speed (RPM): 2900 rpm
– Motor protection class: IP 55
– Motor efficiency: IE 3
– Transmission: direct
– Frequency inverter: Danfoss
– Electrical equipment: WEG or similar
– Control panel: PLC control panel
– Outlet connection: 4”
– dB (A): 81 dB
– Dimensions (mm): 2150 x 3900 x 2350
– Weight: 6650 kg
The JSC range of screw compressors has been designed to meet the compressed air needs of small and medium-sized enterprises, such as automotive service stations, repair and paint shops, etc., as well as different types of industry. The JSC series can be configured according to requirements, mounted on a tank, with or without an integrated dryer. JSC series products are easy to install and maintain, providing reliable, high-quality compressed air. The JSC series stands out for its energy efficiency, superior to piston compressors of similar capacity. Built as standard with a frequency inverter.
If you need to see other compressors, please visit our COMPRESSORS category.
If you have any doubts about the specific compressor you need, please do not hesitate to contact our technical team, who will assist you in your selection.
We have other models with different power and working pressure. If your requirements differ from those listed in the catalogue, please consult us.
