Technical specifications of the JENDER rotary screw compressor – JSC 45V
– Pressure Range: 6-15 bar
– Working pressure: 7.5 bar
– Flow rate: 6.43 m3/min
– Suction or Ambient Temperature: 0-40 ºC
– Outlet Temperature: +5 ºC above suction temperature
– Motor power: 45 kW – 50 HP / 3 phases / 50 Hz / 380 V
– Motor Speed (RPM): 2900 rpm
– Motor Protection Class: IP 55
– Motor Efficiency: IE 3
– Transmission: Belt-driven
– Variable Frequency Drive: Danfoss
– Electrical Equipment: WEG or similar
– Control Panel: PLC Control Panel
– Outlet connection: 1 1/4”
– dB (A): 72 dB
– Dimensions (mm): 1,020×1,390×1,610
– Weight: 920 kg
The JSC screw compressor range has been designed to meet the compressed air needs of small and medium-sized businesses, such as automotive service stations, repair and paint shops, and various types of industry. The JSC series can be configured according to requirements, mounted on a tank, with or without an integrated dryer. JSC series products are easy to install and maintain, providing reliable and high-quality compressed air. The JSC series stands out for its energy efficiency, superior to piston compressors of similar capacity. Built standard with a variable frequency drive.
If you need to see other compressors, please visit our COMPRESSORS category.
If you have doubts about the specific compressor you need, please do not hesitate to contact our technical team, who will assist you with your selection.
We have other models with different power and working pressures. If your needs differ from those listed in the catalog, please consult us.
